1、飼料混合機http://www.862010.cn/皮帶張緊度不合適，張緊過松，不能很好傳遞動力而增，張緊過緊，皮帶磨損快，伸長快，縮短了皮帶輪的壽命或者是皮帶打滑而燒損，所以應該及時調整皮帶張進度適中。
Mixer improper belt tension, the tension is too loose, not a good transmission of power and increasing tension too tight, quick belt wear, elongation faster, shortening the life of the pulley or belt slippage and burning, so should adjust the belt tension is moderate progress.
2、飼料混合機組內多根皮帶長度不均，造成一組幾根皮帶張緊不一致，皮帶傳遞動力的力時不夠，所以應該挑選長度一樣的三角帶。
A plurality of feed mixing unit within the length of the belt is uneven, resulting in a group of a few inconsistencies belt tensioner, belt force transmission of power is not enough, so you should choose the length of the same belt.
3、飼料混合機http://www.862010.cn/進料量過多導致“悶車” 現象，或進料截面過大使刀輥轉速下降過多導致“悶車”現象。
Mixer excessive amount of feed resulting in "boring car" phenomenon, or feed-sectional Ambassador knife roller speed down too much lead to "boring car" phenomenon.